European Journal of Prosthodontics and Restorative Dentistry

A 3D Finite Element Analysis of Bone Tissue in 3-Unit Implant-Supported Prostheses: Effect of Splinting Factor and Implant Length and Diameter

A 3D Finite Element Analysis of Bone Tissue in 3-Unit Implant-Supported Prostheses: Effect of Splinting Factor and Implant Length and Diameter

Email a link to this journal

Cover Date

June 2021

Print ISSN

0965-7452

Electronic ISSN

2396-8893

Vol

29

Issue

2

Abstract

This study aimed to assess the effects of splinting in 3-unit implant-supported prostheses with varying the splinting factor, length of the implant, and the diameter of the 1ºmolar (1ºM) implant on cortical bone tissue (CBT). Twelve 3D models were simulated, which represented the posterior maxillary with 3 implants, supporting 3-unit FDP varying the splinting factor (single-unit crowns, splinted crowns straight-line and offset implant configuration [OIC]), length of the implant (7mm and 8,5mm), and the diameter of the 1ºM (Ø4 mm and Ø5 mm). The CBT was analyzed by maximum principal stress and microstrain maps. The increase in implant diameter improved the biomechanical behavior of rehabilitation. The increase of the implant diameter in the 1ºM associated with OIC generated the best biomechanical behavior for CBT. The splinting was effective in decreasing stress and microstrain, mainly when associated with OIC and implant diameter of Ø5 in the 1ºM. The effect of increasing the diameter of the implant referring to the 1ºM for single-unit crowns was more effective than the effect of the splinting of implants with Ø4 mm in straight-line. The diameter and splinting factors showed to be more important than implant length to reduce the stress and microstrain on CBT.
Keywords
Dental Implant
Finite Element Analysis
Dental Prosthesis